> Smart Solutions. Efficient Manufacturing.
Mechanical Engineering
Explore ZINITEK's typical precision machining and automation solution projects.
ZINITEK project: a swing blanking die whose air cylinder turns the blade unit ±18.75° to cut nested trapezoid blanks from 2 mm strip with zero scrap, with an animated 3D model. Discuss a die solution from your drawing or sample.
ZINITEK project: 8-station progressive die for a 1.5 mm steel U-channel bracket with an animated 3D model. Discuss a die solution from your drawing or sample.
5-axis CNC milling of titanium alloy, meeting stringent requirements for surface finish and a geometric tolerance of 0.002 mm.
ZINITEK blanking die project: a 165 × 195 mm blank cut from 1.2 mm steel offcuts by three knives, with a slitting blade that splits the scrap frame into two pieces, shown as an animated 3D model. Discuss a scrap-reuse die for your drawing or sample part.
A ZINITEK two-plate injection mould for two different PP stepped tubes, with an animated 3D model of mould opening, ejection and robot take-out.
A pneumatic fixture that presses terminals into bobbins, replacing heavy manual plier work so operators work with less effort and productivity at the assembly step improves.
A ZINITEK project covering the design and machining of a Gasket Nut stamping die, with the CAD model and photos of the actual die. Discuss a die solution based on your drawing or product sample.
ZINITEK project: an inverted compound die that pierces and blanks Ø130/Ø80 washers in one stroke, with an animated 3D model. Discuss a die solution from your drawing or sample.
ZINITEK hot forging die set project for a mechanical forging press, with die blocks changed quickly by wedges and clamps and an animated 3D model. Discuss a die for your forging drawing.
Integrating a 6-axis robot with a vision system to automate the inspection and packing of printed circuit boards.
ZINITEK project: Multi-Step Progressive Die for Thin Sheet Parts with an animated 3D model. Discuss a die solution from your drawing or sample.
Using a 3D laser scanner to capture point cloud data, then rebuilding 3D CAD models and producing manufacturing drawings for discontinued parts.
ZINITEK project: an inverted compound die for a 2.5 mm two-hole link plate with a positive knock-out at top dead centre, with an animated 3D model. Discuss a die solution from your drawing or sample.
ZINITEK project: Phase Contact Stamping Die for Electrical Equipment with an animated 3D model. Discuss a die solution from your drawing or sample.
ZINITEK study project of a pierce – parting – V-bend die set for an 18×42 link with an animated 3D model, analysis of the original design and the path to a fully automatic progressive die.
ZINITEK progressive die for metal clips with a side-acting cam, shown as a 3D model running like a 30 spm press. Discuss a die for your drawing or sample.
ZINITEK project: a 12-station progressive die for a floating nut cover, two parts per stroke, shown as an animated 3D model. Discuss a die for your part from a drawing or a sample.
ZINITEK project: Blanking Die with Spring Stripper with an animated 3D model. Discuss a die solution from your drawing or sample.
ZINITEK compound die project: outline blanking and 4-hole piercing in one stroke for a 3.2 mm SPHC steel lever, with an animated 3D model. Discuss a die concept from your drawing or sample.
Turnkey design and manufacturing of a 12-station progressive die, with an output of 60 parts/min and a die life exceeding 1 million strokes.
ZINITEK project: 10A Contact Die with Multi-Angle Bending with an animated 3D model. Discuss a die solution from your drawing or sample.
ZINITEK project: Progressive Die for V-Shaped Electrical Contacts with an animated 3D model. Discuss a die solution from your drawing or sample.
ZINITEK project: 6-station progressive die for a 3 mm steel L-shaped 90° mounting bracket, the kind used to join machine frames, electrical cabinets and cable trays at right angles; two parts per stroke, with an animated 3D model. Discuss a die solution from your drawing or sample.
ZINITEK project: Progressive Die for a Hook Bracket with an animated 3D model. Discuss a die solution from your drawing or sample.
ZINITEK project: a two-station progressive die for a 2 mm steel link plate, with an animated 3D model. Discuss a die for your drawing or sample part.
ZINITEK project: an 11-station progressive die with strip lifters, shown as an animated 3D model. Discuss a die for your part from a drawing or a sample.
ZINITEK single-station blanking die for 2 mm sheet with an animated 3D model. Discuss a die design for your drawing or sample part.
ZINITEK project: Two-Row Electrical Contact Stamping Die with an animated 3D model. Discuss a die solution from your drawing or sample.
ZINITEK progressive die project for a U-bracket: 120 mm pitch, three bends formed with the punch and a moving 3D model with an architecture view. Discuss a die for your drawing or sample part.
ZINITEK project: Pierce and Bend Progressive Die for a Sheet Part with an animated 3D model. Discuss a die solution from your drawing or sample.