3D model
Blanking Die with Spring Stripper: the view-only 3D model shows the upper half, lower half, 4-pillar guiding and the strip, with the opening–closing motion, blanking and strip feed.
Main construction
The stripper hangs on 4 shoulder screws and 4 die springs, clamps the strip before the punch cuts and strips it off the punch as the die opens. The 50 × 70 mm blank passes through the die and drops out below.
Discuss a die for your part
Send a drawing or sample with material, thickness, volume and press data, and ZINITEK will discuss the design and manufacturing approach.
Project Gallery
