Precision Mold Design & Manufacturing

12-Station Progressive Die for a Floating Nut Cover, Two Parts per Stroke

ZINITEK project: a 12-station progressive die for a floating nut cover, two parts per stroke, shown as an animated 3D model. Discuss a die for your part from a drawing or a sample.

3D model of 12-Station Progressive Die for a Floating Nut Cover, Two Parts per Stroke

3D model

The view-only 3D model shows the upper die, the stripper, the lower die, the strip lifters and the 12-station layout, with continuous crank motion, the strip feed, tabs bending with the punches, slugs dropping through the die and finished parts leaving the die. The "Architecture view" button fades the plates to show the inside.

Main design

The 95 mm strip, with pre-pierced pilot holes, advances 33 mm per stroke. The stripper clamps the strip before the punches work; as the die opens, 17 lifters raise it 11 mm so the formed tabs and offsets clear the die. The last station cuts away the centre carrier and releases two mirrored parts per stroke.

Discuss a die for your part

Send a drawing or a reference sample with the material, thickness, volume and press details, and ZINITEK will discuss the design and manufacturing approach with you.

Request die design or manufacturing

Project Gallery

12-Station Progressive Die for a Floating Nut Cover, Two Parts per Stroke 1
12-Station Progressive Die for a Floating Nut Cover, Two Parts per Stroke 2
12-Station Progressive Die for a Floating Nut Cover, Two Parts per Stroke 3
12-Station Progressive Die for a Floating Nut Cover, Two Parts per Stroke 4